| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 10 Pin |
| Case/Package | WFDFN-10 |
| Number of Outputs | 1 Output |
| Output Voltage | 2.5V ~ 8V |
| Output Current | 1 A |
| Quiescent Current | 30.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 2.4 MHz |
| Switching Current | 2 A |
| Input Voltage (Max) | 12 V |
| Input Voltage (Min) | 2.5 V |
| Output Voltage (Max) | 8 V |
| Output Voltage (Min) | 2.5 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -55 ℃ |
| Input Voltage | 12 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -55℃ ~ 125℃ (TJ) |
The TPS63060 provides a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2A while using a dual-cell Li-Ion or Li-Polymer Battery, and discharge it down to 5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin SON PowerPAD package measuring 3mm × 3mm (DSC).
TI
2.5V to 12V input voltage, 93% Efficient, 2.25A Switch Current Limit, Buck-Boost Converter
TI
Conv DC-DC 2.5V to 12V Step Down/Step Up Single-Out 2.5V to 8V 1A 10Pin WSON EP T/R
TI
Conv DC-DC 2.5V to 12V Step Down/Step Up Single-Out 2.5V to 8V 1A 10Pin WSON EP T/R
TI
Conv DC-DC 2.5V to 12V Step Down/Step Up Single-Out 2.5V to 8V 1A 10Pin WSON EP T/R
TI
TPS63060 DC to DC Converter and Switching Regulator Chip 2.5VDC to 8VDC Output Evaluation Board
TI
HIGH INPUT VOLTAGE BUCK-BOOST CONVERTER WITH 2A SWITCH CURRENT 10-WSON -55 to 125
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
