| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 15 Pin |
| Case/Package | VQFN-15 |
| Number of Outputs | 1 Output |
| Output Voltage | 2.5V ~ 9V |
| Output Current | 2 A |
| Number of Positions | 15 Position |
| Quiescent Current | 50.0 µA |
| Switching Frequency | 2.4 MHz |
| Input Voltage (Max) | 16 V |
| Input Voltage (Min) | 2 V |
| Output Voltage (Max) | 9 V |
| Output Voltage (Min) | 2.5 V |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | 40 ℃ |
| Supply Voltage (Min) | 2 V |
| Input Voltage | 2V ~ 16V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
The TPS6307x is a high efficiency, low quiescent current buck-boost converter suitable for applications where the input voltage can be higher or lower than the output voltage. Output currents can go as high as 2 A in boost mode and in buck mode. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save Mode to maintain high efficiency over a wide load current range. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is available in a 2.5 mm × 3 mm QFN package.
TI
Conv DC-DC 2V to 16V Step Down/Step Up Single-Out 2.5V to 9V 2A 15Pin VQFN-HR T/R
TI
Conv DC-DC 2V to 16V Step Down/Step Up Single-Out 5V 2A 15Pin VQFN-HR T/R
TI
Conv DC-DC 2V to 16V Step Down/Step Up Single-Out 5V 2A 15Pin VQFN-HR T/R
TI
Conv DC-DC 2V to 16V Step Down/Step Up Single-Out 2.5V to 9V 2A 15Pin VQFN-HR T/R
TI
TPS63070 DC to DC Converter and Switching Regulator Chip 2.5VDC to 9VDC Output Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
