The TPS6513x is dual-output DC-DC converter generating a positive output voltage up to 15 V and a negative output voltage down to 15 V with output currents in a 200-mA range in typical applications, depending on input voltage to output voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input voltage range of 2.7 V to 5.5 V allows the devices to be powered from batteries or from fixed 3.3-V or 5-V supplies. The TPS6513x comes in a small 4-mm × 4- mm VQFN-24 package. Together with a minimum switching frequency of 1.25 MHz, the device enables designing small power supply applications because it requires only a few small external components.
●The converter operates with a fixed frequency PWM control topology and, if power-save mode is enabled, it uses a pulse-skipping mode at light-load currents. It operates with only 500-µA device quiescent current. Independent enable pins allow power-up and powerdown sequencing for both outputs. The device has an internal current limit overvoltage protection and a thermal shutdown for highest reliability under fault conditions.
● 2.7-V to 5.5-V Input Voltage Range
● Dual Adjustable Output Voltages Up to 15 V and
●Down to 15 V
● 800-mA Typical Switch Current Limit at Boost and
●Inverter Main Switches at TPS65130
● 2-A Typical Switch Current Limit at Boost and
●Inverter Main Switches at TPS65131
● Up to 89% Efficiency at Positive Output
●Voltage Rail
● Up to 81% Efficiency at Negative Output
●Voltage Rail
● Power-Save Mode for High Efficiency at Low Load
●Currents
● Independent Enable Inputs for Power-Up and
●Power-Down Sequencing
● Control Output for External PFET to Support
●Completely Disconnecting the Battery
● Minimum 1.25-MHz Fixed Frequency PWM
●Operation
● Thermal Shutdown
● Overvoltage Protection on Both Outputs
● 1-µA Shutdown Current
● Small 4-mm × 4-mm VQFN-24 Package (RGE)