TPS72325DBVT Datasheet PDF - TI

The TPS72325DBVT is a negative output Low-dropout Linear Regulator offers an ideal combination of features to support low noise applications. The device is capable of operating with input voltages from -10 to -2.7V and support outputs from -10 to -1.2V. These regulators are stable with small, low-cost ceramic capacitors and include enable (EN) and noise reduction (NR) functions. Thermal short-circuit and over-current protections are provided by internal detection and shutdown logic. High PSRR (65dB at 1kHz) and low noise (60µVRMS) make the TPS723xx ideal for low-noise applications.

● 60µVRMS Typical ultralow noise

● 65dB Typical at 1kHz high PSRR

● 280mV Typical at 200mA, 2.5V low dropout voltage

● Stable with a 2.2µF ceramic output capacitor

● Less than 2µA typical quiescent current in shutdown mode

● 2% Overall accuracy (line, load, temperature)

● Thermal and overcurrent protection

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.