TS321IDBVR Datasheet PDF - TI

The TS321IDBVR is a Low-power Single Operational Amplifier for cost-sensitive applications in which space savings are important. This bipolar op amp can handle a single supply between 3 and 30V or a dual-supply between ±1.5 and ±15V. The TS321 has a gain bandwidth of 0.8MHz and 0.4V/µs slew rate. Operational amplifiers have reduced phase margin when there is a direct capacitance on the output. The stability is affected most when the amplifier is set to unity gain. Small signal response to a step input of 100mV reveals the loop stability with a range of capacitors. It is useful in a wide range of signal conditioning applications. Inputs can be powered before VCC for flexibility in multiple supply circuits.

● Wide power-supply range

● Single supply from 3 to 30V

● Dual supply from ±1.5 to ±15V

● Large output voltage swing from 0 to 3.5V (minimum, VCC = 5V)

● Low supply current at 500µA (typical)

● Low input bias current at 20nA (typical)

● Stable with high capacitive loads

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.