Description
●The TS3USB221A-Q1 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in automotive USB hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
●Features
●• Qualified for Automotive Applications
●• AEC-Q100 Qualified With the Following Results:
● – Device Temperature Grade 1: –40°C to 125°C
● Ambient Operating Temperature Range
● – Device HBM ESD Classification Level H2
● – Device CDM ESD Classification Level C5
●• VCC Operation at 2.5 V to 3.3 V
●• VI/O Accepts Signals Up to 5.5 V
●• 1.8-V Compatible Control-Pin Inputs
●• Low-Power Mode When OE Is Disabled (1 µA)
●• rON = 16 Ω Maximum
●• ΔrON = 0.2 Ω Typical
●• Cio(on) = 6 pF Typical
●• Low Power Consumption (30 µA Maximum)
●• High Bandwidth (900 MHz Typical)
●• ESD Performance Tested Per JESD 22
● – 7000-V Human-Body Model (A114-B, Class II)
● – 1000-V Charged-Device Model (C101)
●• ESD Performance I/O to GND Per JESD 22
● – 12-kV Human-Body Model
●Applications
●• Routing High Speed USB Signals
●• Automotive USB Hubs
●• Phone-Controlled Automotive Infotainment