Description
●The TS3USB221A device is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The device also has a low power mode that will reduce the power consumtion to 1 μA for portible applications with a battery or limited power budget. The device is designed for low bit-to bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
●Features
●• VCC Operation at 2.5 V to 3.3 V
●• VI/O Accepts Signals Up to 5.5 V
●• 1.8-V Compatible Control-Pin Inputs
●• Low-Power Mode When OE Is Disabled (1 μA)
●• RON = 6 Ω Maximum
●• ΔRON = 0.2 Ω Typical
●• Cio(on) = 6 pF Typical
●• Low Power Consumption (30 μA Maximum)
●• High Bandwidth (900 MHz Typical)
●• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
●• ESD Performance Tested Per JESD 22
● – 7000-V Human-Body Model (A114-B, Class II)
● – 1000-V Charged-Device Model (C101)
●• ESD Performance I/O to GND
● – 12-kV Human-Body Model
●Applications
●• Routes Signals for USB 1.0, 1.1, and 2.0
●• Mobile Phones
●• Cameras
●• Notebooks
●• USB I/O expansion
