The TS3USB221E is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1 GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The TS3USB221E is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
●The TS3USB221E integrates ESD protection cells on all pins, is available in a SON package (3 mm × 3 mm) as well as in a tiny µQFN package (2 mm × 1.5 mm) and is characterized over the free-air temperature range from 40°C to 85°C.
● VCC Operation of 2.5 V to 3.3 V
● Switch I/Os Accept Signals Up to 5.5 V
● 1.8-V Compatible Control-Pin Inputs
● Low-Power Mode When OE Is Disabled (1 µA)
● rON = 6 Ω Maximum
● ΔrON = 0.2 Ω Typical
● Cio(on) = 7 pF Maximum
● Low Power Consumption (30 µA Maximum)
● ESD Performance Tested Per JESD 22
● 7000-V Human Body Model
●(A114-B, Class II)
● 1000-V Charged-Device Model (C101)
● ESD Performance I/O Port to GND
● 12-kV Human Body Model (A114-B, Class II)
● ±7-kV Contact Discharge (IEC 61000-4-2)
● High Bandwidth (1 GHz Typical)
