TS3USB221EVM Datasheet PDF - TI

The TS3USB221EVM is an evaluation module for TS3USB221 high speed USB 2.0 (480Mbps) 1:2 multiplexer/demultiplexer switch. The USB221EVM allows signals to pass with minimum edge and phase distortion and also multiplexes differential signals from a common USB input to one of two corresponding outputs. This evaluation module demonstrates the low bit to bit skew, high channel to channel noise isolation, and compatibility with various standards, such as high speed USB 2.0 (480Mbps), that is possible when using the TS3USB221 in high speed signalling applications.

● VCC operation at 2.5V and 3.3V

● VI/O accepts signals up to 5.5V

● 1.8V compatible control pin inputs

● Low power mode when OE is disabled (1mA)

● RON = 6R maximum

● ΔrON = 0.2R typical

● Cio(on) = 6pF maximum

● Low power consumption (30mA maximum)

● ESD greater then 2000V human body model

● High bandwidth (1.1GHz typical)

●This EVM contains components that can potentially be damaged by ESD. Always transport and store the EVM in its supplied ESD bag when not in use. Handle using an antistatic wristband.