The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The TUSB1105 and TUSB1106 can be used as USB device transceivers or USB host transceivers.
●The devices allow USB application-specific ICs (ASICs) and programmable logic devices (PLDs), with power-supply voltages from 1.65 V to 3.6 V, to interface with the physical layer (PHY) of the universal serial bus. They have an integrated 5-V to 3.3-V voltage regulator for direct powering via the USB supply VBUS.
●The TUSB1105 allows single-ended and differential input modes selectable by a mode (MODE) input and is available in RGT and RTZ packages. The TUSB1106 allows only differential input mode and is available in PW, RGT, RSV, and RTZ packages.
●The TUSB1105 and TUSB1106 are ideal for portable electronic devices, such as mobile phones, personal digital assistants, information appliances, and digital still cameras.
● Compatible With Universal Serial Bus Specification Rev. 2.0
● Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s)
●and Low-Speed (1.5-Mbit/s) Data Rates
● Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering
●Via USB VBUS
● VBUS Disconnection Indication Through VP and VM
● Used as USB Device Transceiver or USB Host Transceiver
● Stable RCV Output During SE0 Condition
● Two Single-Ended Receivers With Hysteresis
● Low-Power Operation, Ideal for Portable Equipment
● Support I/O Voltage Range From 1.65 V to 3.6 V
● IEC-61000-4-2 ESD Compliant
● ±9-kV Contact-Discharge Model
●(D+, D, VCC(5.0))
● ±15-kV Human-Body Model
●(D+, D, VCC(5.0))
● TUSB1105 Available in Quad Flat No-Lead (QFN) Package; TUSB1106
●Available in QFN and Thin Shrink Small-Outline Package (TSSOP)
● APPLICATIONS
● Mobile Phones
● Personal Digital Assistants (PDAs)
● Information Appliances (IAs)
● Digital Still Cameras (DSCs)
