Introduction
●The TUSB1310 is a single port, 5.0-Gbps USB 3.0 physical layer transceiver operating off of a single crystal or an external reference clock. The reference clock frequencies are selectable from 20, 25, 30, and 40 MHz. The TUSB1310 provides a clock to USB link layer controllers. The single reference clock allows the TUSB1310 to provide a cost effective USB 3.0 solution with few external components and a minimum implementation cost.
●Features
●• Universal Serial Bus (USB)
●– Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver
●• One 5.0-Gbps SuperSpeed Conneciton
●• One 480-Mbps HS/FS/LS Connection
●– Fully Compliant with USB 3.0 Specification
●– Supports 3+ Meters USB 3.0 Cable Length
●– Fully Adaptive Equalizer to Optimize Receiver Sensitivity
●– PIPE to Link Layer Controller
●• Supports 16-Bit SDR Mode at 250 MHz
●• Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.0
●– ULPI to Link Layer Controller
●• Supports 8-Bit SDR Mode at 60 MHz
●• Supports Synchronous Mode and Low Power Mode
●• Compliant with UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1
●• General Features
●– IEEE 1149.1 JTAG Support
●– IEEE 1149.6 JTAG support for the SuperSpeed Port
●– Operates on a Single Reference Clock Selectable from 20, 25, 30 or 40 MHz
●– 3.3-, 1.8-, and 1.1-V Supply Voltages
●– 1.8-V PIPE and ULPI I/O
●– Available in Lead-Free 175-Ball 12- x 12-nF BGA Package (175ZAY)
●Applications
●• Surveillance Cameras
●• Multimedia Handset
●• Smartphone
●• Digital Still Camera
●• Portable Media Player
●• Personal Navigation Device
●• Audio Dock
●• Video IP Phone
●• Wireless IP Phone
●• Software Defined Radio
