TXB0104DG4 Datasheet PDF - TI

DESCRIPTION/ORDERING INFORMATION

●This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

●FEATURES

●• 1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)

●• VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State

●• OE Input Circuit Referenced to VCCA

●• Low Power Consumption, 5-mA Max ICC

●• Ioff Supports Partial-Power-Down Mode Operation

●• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

●• ESD Protection Exceeds JESD 22

●– A Port

●  – 2500-V Human-Body Model (A114-B)

●  – 1500-V Charged-Device Model (C101)

●– B Port

●  – ±15-kV Human-Body Model (A114-B)

●  – 1500-V Charged-Device Model (C101)