TXB0106RGYR Datasheet PDF - TI

The TXB0106RGYR is a 6-bit Non-inverting Translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. When the OE input is low, all outputs are placed in the high-impedance state. The TXB0106 is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.

● VCC Isolation feature - If either VCC input is at GND, all outputs are in the high-impedance state

● OE Input circuit referenced to VCCA

● 4µA Maximum low-power consumption

● Ioff Supports partial-power-down mode operation

● Latch-up performance exceeds 100mA per JESD 78, Class II

● Green product and no Sb/Br