TXS0108EPWRG4 Datasheet PDF - TI

DESCRIPTION/ORDERING INFORMATION

●This 8-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.

●When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

●FEATURES

●• No Direction-Control Signal Needed

●• Max Data Rates

●– 60 Mbps (Push Pull)

●– 2 Mbps (Open Drain)

●• 1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)

●• No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First

●• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

●• ESD Protection Exceeds JESD 22 (A Port)

●– 2000-V Human-Body Model (A114-B)

●– 150-V Machine Model (A115-A)

●– 1000-V Charged-Device Model (C101)

●• IEC 61000-4-2 ESD (B Port)

●– ±8-kV Contact Discharge

●– ±6-kV Air-Gap Discharge