The UC3854DW is a high Power Factor Preregulator provides active power factor correction for power systems that otherwise would draw non-sinusoidal current from sinusoidal power lines. This device implements all the control functions necessary to build a power supply capable of optimally using available power-line current while minimizing line-current distortion. To do this, it contains a voltage amplifier, an analog multiplier/divider, a current amplifier and a fixed-frequency PWM. In addition, it contains a power MOSFET compatible gate driver, 7.5V reference, line anticipator, load-enable comparator, low-supply detector and over-current comparator. It uses average current-mode control to accomplish fixed frequency current control with stability and low distortion. Unlike peak current-mode, average current control accurately maintains sinusoidal line current without slope compensation and with minimal response to noise transients.
● Limit line current distortion to <5%
● World-wide operation without switches
● Feed-forward line regulation
● Average current-mode control
● Low noise sensitivity
● Low startup supply current
● Fixed-frequency PWM drive
● Low-offset analog multiplier/divider
● 1A Totem-pole gate driver
● Precision voltage reference
● Green product and no Sb/Br
