| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 40.0V (max) |
| Case/Package | PDIP-16 |
| Power Rating | 1 W |
| Input Voltage (DC) | 40.0 V |
| Output Voltage | 40 V |
| Output Current | 0.04 A |
| Number of Channels | 1 Channel |
| Number of Positions | 16 Position |
| Power Dissipation | 1000 mW |
| Input Voltage (Max) | 40 V |
| Output Current (Max) | 40 mA |
| Output Current (Min) | 25 mA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Power Dissipation (Max) | 1000 mW |
| Supply Voltage | 4.2.4.8 VDC |
| Supply Voltage (Max) | 40 V |
| Supply Voltage (Min) | 5 V |
| Input Voltage | 40 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Recommended for New Designs |
| Packaging | Tube |
| Size-Length | 19.3 mm |
| Size-Width | 6.35 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The UC3906N is a Linear Lead-Acid Battery Charger features precision reference tracks battery requirements over-temperature. The UC2906 series of battery charger controller contains all of the necessary circuitry to optimally control the charge and hold cycle for sealed lead-acid batteries. This integrated circuit monitor and control both the output voltage and current of the charger through three separate charge states a high current bulk-charge state, a controlled over-charge and a precision float-charge or standby state. Optimum charging conditions are maintained over an extended temperature range with an internal reference that tracks the nominal temperature characteristics of the lead-acid cell. A typical standby supply current requirement of only 1.6mA allows these ICs to predictably monitor ambient temperatures. Separate voltage loop and current limit amplifiers regulate the output voltage and current levels in the charger by controlling the onboard driver.
● Optimum control for maximum battery capacity and life
● Internal state logic provides three charge states
● Controls both voltage and current at charger output
● System interface functions
● Green product and no Sb/Br
TI
the uc2906 series of battery charger controllers contains all of the necessary circuitry to optimally control the cha...
TI
TEXAS INSTRUMENTS UC3906N Battery Charger for 4 Cells of Lead Acid battery, 40V input, 2A charge, DIP-16
TI
TEXAS INSTRUMENTS UC3906DW Battery Charger for Lead Acid battery, 40V input, 2A charge, SOIC-16
TI
TEXAS INSTRUMENTS UC3906DWTR Battery Charger for Lead Acid battery, 40V input, 2A charge, SOIC-16
TI
TEXAS INSTRUMENTS UC3906Q Battery Charger for Lead Acid battery, 40V input, 2A charge, LCC-20
TI
Charge Controller Lead-Acid 2000mA 16Pin SOIC T/R
TI
Charge Controller Lead-Acid 2000mA 16Pin SOIC Tube
TI
Charge Controller Lead-Acid 2000mA 16Pin PDIP Tube
TI
Charge Controller Lead-Acid 2000mA 20Pin PLCC T/R
TI
Charge Controller Lead-Acid 2000mA 20Pin PLCC Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
