The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90160 offers support for margining, and general-purpose PWM functions.
●Specific power states can be achieved using the Pin-Selected Rail States feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.
●The TI Fusion Digital Power™ designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.
● Monitor and Sequence 16 Voltage Rails
● All Rails Sampled Every 400 µs
● 12-bit ADC With 2.5-V, 0.5% Internal VREF
● Sequence Based on Time, Rail and Pin
●Dependencies
● Four Programmable Undervoltage and
●Overvoltage Thresholds per Monitor
● Nonvolatile Error and Peak-Value Logging
●per Monitor (up to 12 Fault Detail Entries)
● Closed-Loop Margining for 10 Rails
● Margin Output Adjusts Rail Voltage to Match
●User-Defined Margin Thresholds
● Programmable Watchdog Timer and System
●Reset
● Pin Selected Rail States for ACPI Support
● Flexible Digital I/O Configuration
● Multiphase PWM Clock Generator
● Clock Frequencies From 15.259 kHz
●to 125 MHz
● Capability to Configure Independent Clock
●Outputs for Synchronizing Switch-Mode Power
●Supplies
● JTAG and I2C/SMBus/PMBus™ Interfaces
