The ULN2003V12PWR is a relay and inductive load Sink Driver features 7 low output impedance drivers that minimize on-chip power dissipation. When driving a typical 12V relay coil an ULN2003V12 will dissipate up to 12 times lower power than an equivalent ULN2003A. It supports 3.3 to 5V CMOS logic input interface thus making it compatible to a wide range of micro-controllers and other logic interfaces. The ULN2003V12 features an improved input interface that minimizes the input DC current drawn from the external drivers. The ULN2003V12 features an input RC snubber that greatly improves its performance in noisy operating conditions. The ULN2003V12 channel inputs feature an internal input pull-down resistor thus allowing input logic to be tri-stated. It provides flexibility of increasing current sink capability through combining several adjacent channels in parallel. Under typical conditions the ULN2003V12 can support up to 1A of load current when all 7-channel is connected in parallel.
● Supports wide range of low and high voltage relays and inductive coils
● Internal free-wheeling diodes for inductive kick-back protection
● Input pull-down resistors allows tri-stating the input driver
● Input RC-snubber to eliminate spurious operation in noisy environment
● Low input and output leakage currents
● Easy to use parallel interface
● Supports up to 20V output pull-up voltage
● ESD protection exceeds JESD 2 - 2kV HBM, 500V CDM
● Compatible to 3.3 and 5V microcontrollers and logic interface
● Green product and no Sb/Br
