Part Datasheet Search > OPA547 Datasheet PDF
Images are for reference

OPA547 Datasheet PDF

Part Series:OPA547 Series
Description:High-Voltage (100V), High-Current (50mA) OPERATIONAL AMPLIFIERS, G = 1 Stable
Document:OPA547F/500G3 Datasheet PDF (45 Pages)

OPA547 Datasheet PDF

33 Pages
TI
TEXAS INSTRUMENTS OPA547FKTWTG3 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
28 Pages
TI
TEXAS INSTRUMENTS OPA547T-1 Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, 8V to 60V, TO-220, 7Pins
21 Pages
TI
BURR-BROWN OPA547T Operational Amplifier, Single, 1MHz, 1 Amplifier, 6V/s, 4V to 30V, TO-220, 7Pins
21 Pages
TI
OP Amp Single GP ±30V/60V 7Pin(7+Tab) TO-220 Tube
20 Pages
TI
Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-263, 7Pins
20 Pages
TI
IC OPAMP GP 1MHz TO220-7
20 Pages
Burr Brown
Operational Amplifier, Single, 1 Amplifier, 1MHz, 6V/µs, ± 4V to ± 30V, TO-220, 7Pins
20 Pages
TI
High-Voltage (100V), High-Current (50mA) OPERATIONAL AMPLIFIERS, G = 1 Stable
20 Pages
Burr Brown
IC OPAMP GP 1MHz DDPAK

OPA547 Specifications

TYPE
DESCRIPTION
Case/Package
DDPAK-7
Number of Channels
1 Channel
show more

OPA547 Function Overview

The OPA547 is a low-cost, high-voltage/high-current operational amplifier ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current.
The OPA547 operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground.
The OPA547 is internally protected against over-temperature conditions and current overloads. In addition, the OPA547 was designed to provide an accurate, user-selected current limit. Unlike other designs which use a "power" resistor in series with the output current path, the OPA547 senses the load indirectly. This allows the current limit to be adjusted from 0mA to 750mA with a 0 to 150 µA control signal. This is easily done with a resistor/potentiometer or controlled digitally with a voltage-out or current-out DAC.
The Enable/Status (E/S) pin provides two functions. An input on the pin not only disables the output stage to effectively disconnect the load, but also reduces the quiescent current to conserve power. The E/S pin output can be monitored to determine if the OPA547 is in thermal shutdown.
The OPA547 is available in an industry-standard 7-lead staggered and straight lead TO-220 package, and a 7-lead DDPAK surface-mount plastic power package. The copper tab allows easy mounting to a heat sink or circuit board for excellent thermal performance. It is specified for operation over the extended industrial temperature range, –40°C to +85°C.
WIDE SUPPLY RANGE Single Supply: +8V to +60V Dual Supply: ±4V to ±30V
HIGH OUTPUT CURRENT: 500mA Continuous
WIDE OUTPUT VOLTAGE SWING
FULLY PROTECTED: Thermal Shutdown Adjustable Current Limit
OUTPUT DISABLE CONTROL
THERMAL SHUTDOWN INDICATOR
HIGH SLEW RATE: 6V/µs
LOW QUIESCENT CURRENT
PACKAGES: 7-Lead TO-220, Zip and Straight Leads 7-Lead DDPAK Surface-Mount
APPLICATIONS
VALVE, ACTUATOR DRIVERS
SYNCHRO, SERVO DRIVERS
POWER SUPPLIES
TEST EQUIPMENT
TRANSDUCER EXCITATION
AUDIO AMPLIFIERS
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.