Part Datasheet Search > Square D > ATS01N232QN Datasheet PDF > ATS01N232QN Datasheet Pages 1/2
ATS01N232QNDatasheet PDF
Page:
of 2 Go
If the format of the manual is confusing, please download and read the original PDF file.
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Apr 1, 2012
1
Product data sheet
Characteristics
ATS01N232QN
soft starter for asynchronous motor - ATS01 -
32 A - 380..415V - 15 KW
Main
Range of product Altistart 01
Product or component
type
Soft starter
Product destination Asynchronous motors
Product specific appli-
cation
Simple machine
Component name ATS01
Network number of
phases
3 phases
Power supply voltage 380...415 V (- 10...10 %)
Icl nominal current 32 A
Utilisation category AC-53B conforming to EN/IEC 60947-4-2
Current at nominal load 160 A at nominal load
Type of start Start with voltage ramp
Power dissipation in W 4.5 W at full load and at end of starting
324.5 W in transient state
Complementary
Assembly style With heat sink
Function available Integrated bypass
Power supply voltage limits 342...456 V
Power supply frequency 50...60 Hz (- 5...5 %)
Power supply frequency limits 47.5...63 Hz
Motor power kW 15 kW at 380...415 V 3 phases
Output voltage <= power supply voltage
Control circuit voltage Built into the starter
Starting time 1 s /50 start(s) per hour
5 s /10 start(s) per hour
10 s /5 start(s) per hour
Adjustable from 1 to 10 s
Deceleration time symb Adjustable from 1 to 10 s
Starting torque 30...80 % of starting torque of motor connected directly on the line supply
Discrete input type (LI1, LI2, BOOST) stop, run and boost on start-up functions logic ≤ 8 mA 27
kOhm
Discrete input voltage 24...40 V
Discrete input logic (LI1, LI2, BOOST) positive State 0 < 5 V and < 0.2 mA state 1 > 13 V and > 0.5
mA
Discrete output current 2 A DC-13
3 A AC-15
Discrete output type (LO1) open collector logic end of starting signal
(R1A, R1C) relay outputs NO
Discrete output voltage 24 V (6...30 V) open collector logic
Minimum switching current Relay outputs 10 mA 6 V DC
Maximum switching current Relay outputs 2 A 30 V DC inductive load, cos phi = 0.5 L/R = 20 ms
Relay outputs 2 A 250 V AC inductive load, cos phi = 0.5 L/R = 20 ms
Display type 1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
Tightening torque 0.5 N.m
1.9...2.5 N.m
Downloaded from Elcodis.com electronic components distributor