Part Datasheet Search > Operational Amplifiers(General Purpose) > Intersil > CA3130EZ Datasheet PDF > CA3130EZ Datasheet Pages 1/17
CA3130EZ Datasheet - Intersil
Manufacturer: | Intersil |
Category: | Operational Amplifiers(General Purpose) |
Case Package: | DIP-8 |
Description: | INTERSIL CA3130EZ Operational Amplifier, Single, 1 Amplifier, 15MHz, 30V/µs, 5V to 16V, DIP, 8Pins |
Pictures: |
CA3130EZDatasheet PDF
Page:
of 17 Go
If the format of the manual is confusing, please download and read the original PDF file.
1
®
CA3130, CA3130A
15MHz, BiMOS Operational Amplifier with
MOSFET Input/CMOS Output
CA3130A and CA3130 are op amps that combine the
advantage of both CMOS and bipolar transistors.
Gate-protected P-Channel MOSFET (PMOS) transistors are
used in the input circuit to provide very-high-input
impedance, very-low-input current, and exceptional speed
performance. The use of PMOS transistors in the input stage
results in common-mode input-voltage capability down to
0.5V below the negative-supply terminal, an important
attribute in single-supply applications.
A CMOS transistor-pair, capable of swinging the output
voltage to within 10mV of either supply-voltage terminal (at
very high values of load impedance), is employed as the
output circuit.
The CA3130 Series circuits operate at supply voltages
ranging from 5V to 16V, (±2.5V to ±8V). They can be phase
compensated with a single external capacitor, and have
terminals for adjustment of offset voltage for applications
requiring offset-null capability. Terminal provisions are also
made to permit strobing of the output stage.
• The CA3130A offers superior input characteristics over
those of the CA3130.
Features
• MOSFET Input Stage Provides:
- Very High Z
I
= 1.5 TΩ (1.5 x 10
12
Ω) (Typ)
- Very Low I
I
. . . . . . . . . . . . . 5pA (Typ) at 15V Operation
. . . . . . . . . . . . . . . . . . . . . .= 2pA (Typ) at 5V Operation
• Ideal for Single-Supply Applications
• Common-Mode Input-Voltage Range Includes
Negative Supply Rail; Input Terminals can be Swung 0.5V
Below Negative Supply Rail
• CMOS Output Stage Permits Signal Swing to Either (or
both) Supply Rails
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Ground-Referenced Single Supply Amplifiers
• Fast Sample-Hold Amplifiers
• Long-Duration Timers/Monostables
• High-Input-Impedance Comparators
(Ideal Interface with Digital CMOS)
• High-Input-Impedance Wideband Amplifiers
• Voltage Followers (e.g. Follower for Single-Supply D/A
Converter)
• Voltage Regulators (Permits Control of Output Voltage
Down to 0V)
• Peak Detectors
• Single-Supply Full-Wave Precision Rectifiers
• Photo-Diode Sensor Amplifiers
Pinout
CA3130, CA3130A
(PDIP, SOIC)
TOP VIEW
Ordering Information
PART NO.
(BRAND)
TEMP.
RANGE (
o
C) PACKAGE
PKG.
DWG. #
CA3130AE
-55 to 125 8 Ld PDIP E8.3
CA3130AM
(3130A)
-55 to 125 8 Ld SOIC M8.15
CA3130AM96
(3130A)
-55 to 125 8 Ld SOIC
Tape and Reel
M8.15
CA3130AMZ
(3130AZ) (Note)
-55 to 125 8 Ld SOIC
(Pb-free)
M8.15
CA3130AMZ96
(3130AZ) (Note)
-55 to 125 8 Ld SOIC
Tape and Reel (Pb-free)
M8.15
CA3130E
-55 to 125 8 Ld PDIP E8.3
CA3130EZ
(Note)
-55 to 125 8 Ld PDIP*
(Pb-free)
E8.3
CA3130M
(3130)
-55 to 125 8 Ld SOIC M8.15
CA3130M96
(3130)
-55 to 125 8 Ld SOIC
Tape and Reel
M8.15
CA3130MZ
(3130MZ) (Note)
-55 to 125 8 Ld SOIC
(Pb-free)
M8.15
CA3130MZ96
(3130MZ)
-55 to 125 8 Ld SOIC
Tape and Reel (Pb-free)
M8.15
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not
intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate termination finish,
which are RoHS compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
OFFSET
INV.
NON-INV.
V-
1
2
3
4
8
7
6
5
STROBE
V+
OUTPUT
OFFSET
-
+
NULL
INPUT
INPUT
NULL
Data Sheet August 1, 2005 FN817.6
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.