Part Datasheet Search > Interface ICs > TI > DS26LS32MJ/883 Datasheet PDF > DS26LS32MJ/883 Datasheet Pages 1/11
DS26LS32MJ/883 Datasheet - TI
| Manufacturer: | TI |
| Category: | Interface ICs |
| Case Package: | CDIP |
| Description: | Quad Receiver RS-422/RS-423 16Pin CDIP Tube |
| Pictures: |
DS26LS32MJ/883Datasheet PDF
Page:
of 11 Go
If the format of the manual is confusing, please download and read the original PDF file.
DS26LS32MQML
www.ti.com
SNOSAM6B –OCTOBER 2005–REVISED APRIL 2013
DS26LS32MQML Quad Differential Line Receivers
Check for Samples: DS26LS32MQML
1
FEATURES
DESCRIPTION
The DS26LS32 and DS26LS32A are quad differential
2
• High Differential or Common-Mode Input
line receivers designed to meet the RS-422, RS-423
Voltage Ranges of ±7V on the DS26LS32.
and Federal Standards 1020 and 1030 for balanced
• ±0.2V Sensitivity Over the Input Voltage Range
and unbalanced digital data transmission.
on the DS26LS32.
The DS26LS32 and DS26LS32A have an input
• DS26LS32 Meet All Requirements of RS-422
sensitivity of 200 mV over the input voltage range of
and RS-423
±7V. The DS26LS33 has an input sensitivity of
• 6k Minimum Input Impedance
500 mV over the input voltage range of ±15V.
• 100 mV Input Hysteresis on the DS26LS32
The DS26LS32A differs in function from the popular
• Operation From a single 5V Supply
DS26LS32 and DS26LS33 in that input pull-up and
pull-down resistors are included which prevent output
• TRI-STATE Outputs, with Choice of
oscillation on unused channels.
Complementary Output Enables for Receiving
Directly onto a Data Bus
Each version provides an enable and disable function
common to all four receivers and features TRI-STATE
outputs with 8 mA sink capability. Constructed using
low power Schottky processing, these devices are
available over the full military and commercial
operating temperature ranges.
Logic Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.