Part Datasheet Search > Interface ICs > FTDI Chip > FT4232H-56Q-TRAY Datasheet PDF > FT4232H-56Q-TRAY Datasheet Pages 1/53
FT4232H-56Q-TRAY
Price from AiPCBA
FT4232H-56Q-TRAYDatasheet PDF
Page:
of 53 Go
If the format of the manual is confusing, please download and read the original PDF file.
Copyright © Future Technology Devices International Limited 1
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet
Version 2.3
Doc ument N o.: FT _000060 C learance N o.: FT DI#78
Future Technology
Devices International Ltd
FT4232H Quad High Speed
USB to Multipurpose
UART/MPSSE IC
The FT4232H is FTDI’s 5
th
generation of USB devices.
The FT4232H is a USB 2.0 High Speed (480Mb/s) to
UART/MPSSE ICs. The device features 4 UARTs. Two
of these have an option to independently configure
an MPSSE engine. This allows the FT4232H to
operate as two UART/Bit -Bang ports plus two MPSSE
engines used to emulate JTAG, SPI, I
2
C, Bit-bang or
other synchronous serial modes. The FT4232H has
the following advanced features:
Single chip USB to quad serial ports with a
variety of configurations.
Entire USB protocol handled on the chip. No USB
specific firmw are programming required.
USB 2.0 High Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Tw o Multi-Protocol Synchronous Serial Engine
(MPSSE) on channel A and channel B, to simplify
synchronous serial protocol (USB to JTAG, I
2
C,
SPI or bit-bang) design.
Independent Baud rate generators.
RS232/RS422/RS485 UART Transfer Data Rate
up to 12Mbaud. (RS232 Data Rate limited by
external level shifter).
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the requirement
for USB driver development in most cases.
Optional traffic TX/RX indicators can be added
with LEDs and an external 74HC595 shift
register.
Adjustable receive buffer timeout.
Support for USB suspend and resume conditions
via PWREN#, SUSPEND# and RI# pins.
Highly integrated design includes +1.8V LDO
regulator for VCORE, integrated POR function
and on chip clock multiplier PLL (12MHz
480MHz).
FTDI FT232B style, asynchronous serial UART
interface option with full hardware handshaking
and modem interface signals.
Fully assisted hardware or X-On / X-Off software
handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial
applications using TXDEN pin.
Operational configuration mode and USB
Description strings configurable in external
EEPROM over the USB interface.
Low operating and USB suspend current.
Configurable I/O drive strength (4, 8, 12 or
16mA) and slew rate.
Supports bus powered, self-powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets
in High Speed mode).
Dedicated Windows DLLs available for USB to
JTAG, USB to SPI, and USB to I
2
C applications.
+1.8V (chip core) and +3.3V I/O interfacing
(+5V Tolerant).
Extended -40°C to 85°C industrial operating
temperature range.
Compact 64-LD Lead Free LQFP or QFN package
Available in compact Pb-free 56 Pin VQFN
packages (RoHS compliant)
+3.3V single supply operating voltage range.
ESD protection for FT4232H IO’s:
Human Body Model (HBM) ±2kV,
Machine Mode (MM) ±200V,
Charge Device Model (CDM) ±500V,
Latch-up free.
N either the whole nor any part of the information c ontained in, or t he product described in this manual, may be adapted or reproduc ed in
any material or elec tronic form without the prior written cons ent of the c opyright holder. T his produc t and its documentation are s upplied
on an as-is basis and no warranty as to their s uitability for any partic ular purpos e is either made or implied. Future T echn ology Devices
I nternational L td will not accept any c laim for damages hows oever arising as a res ult of us e or failure of this produc t. Your statutory rights
are not affec ted. T his product or any variant of it is not intended for us e in any medical applianc e, devic e or sys tem in which the failure of
the product might reasonably be expected to res ult in personal injury. T his doc ument provides preliminary information that ma y be s ubjec t
to c hange without notic e. N o freedom to us e patents or other intellectual property rights is implied by the publication of this document.
Future T echnology D evic es International Ltd, U nit 1 , 2 Seaward Place, C enturion Bus iness Park, Glasgow, G 41 1HH , U nited Kingdom.
Sc otland Registered N umber: SC 136640

FT4232H-56Q-TRAY Documents

FTDI Chip
53 Pages / 1.38 MByte
FTDI Chip
69 Pages / 0.4 MByte
FTDI Chip
92 Pages / 5.6 MByte
FTDI Chip
1 Pages / 0.21 MByte

FT4232H56 Documents

FTDI Chip
FTDI FT4232H-56Q-REEL Interface Bridges, USB to UART, MPSSE, 1.62V, 1.98V, QFN, 64Pins, -40℃
FTDI Chip
IC MINI MODULE USB/FIFO 56QFN
FTDI Chip
USB to UART Bridge Controller UART/USB Interface 56Pin VQFN EP Tray
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.