Part Datasheet Search > Brumfield > IM07GR Datasheet PDF > IM07GR Datasheet Pages 1/6
IM07GRDatasheet PDF
Page:
of 6 Go
If the format of the manual is confusing, please download and read the original PDF file.
01-2016, Rev. 0116
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
AXICOM
Signal Relays
IM Relay
n
Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm
2
n
Switching current 2/5A, switching power 60W/62.5VA and
switching voltage 220VDC/250VAC
n
Low coil power consumption,
140mW standard, 100mW for high sensitive version, 50mW for ultra
high sensitive version and 100mW for bistable version
n
High dielectric and surge capability up to 2500Vrms between open
contacts and 2500Vrms between coil and contacts
n
High mechanical shock resistance up to 50g functional
Typical applications
Telecommunication, access and transmission equipment, optical network
terminals, modems, office and business equipment, consumer electronics,
measurement and test equipment, industrial control, medical equipment,
HVAC
Approvals
UL 508 File No. E 111441
Technical data of approved types on request
Contact Data standard, C D, I P
standard and high high contact
high dielectric current stability
version version version
Contact arrangement 2 form C, 2 CO
Max. switching voltage 220VDC, 220VDC, 220VDC,
250VAC 250VAC 250VAC
Rated current 2A 5A 2A
Limiting continuous current 2A 5A 2A
Switching power 60W, 62.5VA
Contact material PdRu AgNi PdRu
+Au +Au +Au
covered covered covered
Contact style twin cont. twin cont. twin cont.
I: single contacts
Minimum switching voltage 100µV
Initial contact resistance <50mΩ at 10mA/30mV
I: < 100mΩ
Thermoelectric potential <10µV
Operate time typ. 1ms, max. 3ms
Release time
without diode in parallel typ. 1ms, max. 3ms
with diode in parallel typ. 3ms, max. 5ms
Bounce time max. typ. 1ms, max. 5ms
Contact Data (continued)
Electrical endurance
at contact application 0
(≤30mV/≤10mA) min. 2.5x10
6
operations
cable load open end min. 2.0x10
6
operations
resistive, 125VDC / 0.24A - 30W min. 5x10
5
operations
resistive, 220 VDC / 0.27A - 60W min. 1x10
5
operations
resistive, 250VAC / 0.25A - 62.5VA min. 1x10
5
operations
resistive, 30VDC / 1A - 30W min. 5x10
5
operations
resistive, 30VDC / 2A - 60W min. 1x10
5
operations
UL contact rating 30VDC, 2A, 60W, NO only
110VDC, 0.3A, 33W
220VDC, 0.27A, 60W
125VAC, 0.5A, 62.5W
250VAC, 0.25A, 62.5W
Mechanical endurance 10
8
operations
Coil Data
Magnetic system monostable, bistable
Coil voltage range 1.5 to 24VDC
Coil versions, standard version, monostable, 1 coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
00 1.5 1.13 0.15 16 140
08 2.4 1.80 0.24 41 140
01 3 2.25 0.30 64 140
02 4.5 3.38 0.45 145 140
03 5 3.75 0.50 178 140
04 6 4.50 0.60 257 140
05 9 6.75 0.90 579 140
06 12 9.00 1.20 1029 140
07 24 18.00 2.40 2880 200
All figures are given for coil without pre-energization, at ambient temperature +23°C
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 of 28
AXICOMÊSignalÊRelays
IM Relay
Contact Data
IM-A IM-B IM-C IM-D IM-E
Number of contacts and type
1ÊPoleÊbreak 1ÊPoleÊmake 1ÊPoleÊÊ
changeover
2ÊPoleÊbreak 2ÊPoleÊmake
Contact assembly
BifurcatedÊcontacts
Contact material
Palladium-ruthenium,Êgold-covered
Limiting continuous current
at max. ambient temperature
2ÊA2ÊA 4ÊA2ÊA 2ÊA
Maximum switching current
2ÊA 2ÊA 3ÊA 2ÊA 2ÊA
Maximum swichting voltage
220ÊVdc
250ÊVac
Maximum switching capacity
60ÊW,Ê62.5ÊVA
Thermoelectric potential
<Ê10ʵV
Minimum switching voltage
100ʵV
Initial contact resistance /
measuring condition: 10 mA / 20 mV
< 100 mΩ < 100 mΩ NO < 100 mΩ < 50 mΩ < 50 mΩ
Electrical CC0 Contact category 0
endurance (≤ 30 mV / ≥ 10 mA)
cable load open end
Resistive load at 125 Vdc / 0.24 A - 30 W
at 220 Vdc / 0.27 A - 60 W
at 250 Vac / 0.25 A - 62.5
VA
at 30 Vdc / 1 A - 30 W
at 30 Vdc / 2 A - 60 W
min.Ê2.5ÊxÊ10
6
Êoperations
min.Ê2.0ÊxÊ10
6
Êoperations
min.Ê5ÊxÊ10
5
Êoperations
min.Ê1ÊxÊ10
5
Êoperations
min.Ê1ÊxÊ10
5
Êoperations
min.Ê5ÊxÊ10
5
Êoperations
min.Ê1ÊxÊ10
5
Êoperations
Mechanical endurance
typ.Ê10
8
Êoperations
UL contact ratings 220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
DC Voltage [Vdc]
DC current [A]
resistive load
108-98001 Rev. M
All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28
AXICOMÊSignalÊRelays
IM Relay
Coil Operating Range
U
nom
= Nominal coil voltage
U
max.
= Upper limit of the operative range of
the coil voltage (limiting voltage) when
coils are continously energized
U
op. min.
= Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp.
Ureset min.
U
rel. min.
= Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0. 2
0. 4
0. 6
0. 8
1
1. 2
1. 4
1. 6
1. 8
2
2. 2
2. 4
2. 6
2. 8
3
3. 2
3. 4
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 10 0110 12 0
Coil Voltage [U/Unom]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
U
nom.
nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50 -40 -30 -20 -10 0102030405060708090 100 110 120
Ambient Temperature [°C]
Coil Voltage [U/Unom
]
Umax. at 0A
Umax. at 2x2A
Umax. at 2x1A
Unom. nominal coil voltage
Urel. min.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-50-40 -30-20 -100 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/U
nom
]
U
max
. - 5%coil
duty at
2x2A (100mW)
U
max
.-5%coil
duty at 0A(100mW)
Umax.-5%coil
duty at 0A (200mW)
Umax. -5% coil
duty at 2x1A (100mW)
Unom. nominal coil voltage
Umax. at 0A
140mW coil
200mW coil
Urel. min.
50mW coil
100mW coil
Uop min.
Umax. at 0A
Umax. - 100% coil duty at
0A (100mW)
Umax. - 100% coil duty at
0A (200mW)
Uset min.
100 mW Latching
200 mW Latching
Coil operating range, standard version
Max. DC load breaking capacity
U
IM_
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.