Part Datasheet Search > DC/DC Converters > XP Power > JTL4024S12 Datasheet PDF > JTL4024S12 Other Datasheet PDF Pages 1/2
JTL4024S12Datasheet PDF
Page:
of 2 Go
If the format of the manual is confusing, please download and read the original PDF file.
DC-DC
Specification
40 Watts
• 4:1 Input Range
• High Power Density
• Single and Dual Outputs
• High Efficiency - Up to 92%
• Remote On/Off
• 1600 VDC Isolation
• 3 Year Warranty
JTL40 Series
Input
Input Voltage Range • 24 V (9-36 VDC), 48 V (18-75 VDC)
Input Current • See table
Undervoltage Lockout • 24 V models: ON 8.6 V, OFF 7.9 V typical
48 V models: ON 17.8 V, OFF 16 V typical
Input Surge • 24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Output
Output Voltage • See table
Output Voltage Trim • ±10% on single outputs models only
Minimum Load • No minimum load required for single
output models, 10% required for dual
output models
Line Regulation • ±0.5% max
Load Regulation • Single output models: ±0.5% max
Dual output models: ±1% max
balanced outputs
Cross Regulation • ±5% for dual outputs, see note 2
Setpoint Accuracy • ±1%
Start Up Time • 25 ms typical
Ripple & Noise • 50 mV pk-pk max for 3.3 V & 5 V models,
75 mV pk-pk max for other single output
models,
150 mV pk-pk max for dual output
models, see note 3
Transient Response • 3% max deviation, recovery to within
1% in <250 µs for a 25% load change
Temperature • 0.02%/°C
Coefficient
Overvoltage Protection • 3.3 V models: 3.9 V typical
5 V models: 6.2 V typical
12 V models: 15 V typical
15 V models: 18 V typical
±12 V models: ±15 V typical
±15 V models: ±18 V typical
Overload Protection • >150%
Short Circuit Protection • Trip & restart (Hiccup mode), auto recovery
Remote On/Off • On = Logic High (>3.0) or Open
Off = Logic Low (<1.2 V) or short pin 2 to 3
xppower.com
General
Efficiency • See table
Isolation • 1600 VDC Input to Output
1600 VDC Input to Case
1600 VDC Output to Case
Isolation Capacitance • 2500 pF max
Switching Frequency • 270 kHz, typical
MTBF • 150 kHrs min to MIL-HDBK-217F
at 25 ºC, GB
Environmental
Operating Temperature • -40 °C to +85 °C, see derating curve
Case Temperature • +105 °C max
Cooling • Convection-cooled
Operating Humidity • 5-95% RH, non-condensing
Storage Temperature • -40 °C to +125 °C
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.