Part Datasheet Search > Through-Hole Resistors > TT Electronics/BI > MHP1000R220F Datasheet PDF > MHP1000R220F Other Datasheet PDF Pages 1/2
MHP1000R220F Other Datasheet PDF - TT Electronics/BI
Manufacturer: | TT Electronics/BI |
Category: | Through-Hole Resistors |
Case Package: | TO-247 |
Description: | Through Hole Thick Film Resistor, MHP100 Series, 0.22Ω, 100W, - 1%, 700V, TO-247 |
Pictures: |
MHP1000R220FDatasheet PDF
Page:
of 2 Go
If the format of the manual is confusing, please download and read the original PDF file.
100W TO-247 HIGH POWER RESISTORS
Features………………………………………………………….
Non-inductive, high power resistor.
Thermally enhanced Industry standard TO-247 package.
Extremely Low thermal resistance, 1.3 °C/W resistor hot spot to metal tab.
Complete thermal flow design available for easy implementation.
Superior vibration durability.
Small thin package for high density PCB installation.
RoHS compliant.
Applications………………………………………………………
High frequency circuits and wide band / linear amplifiers.
Switch mode and industrial RF power sources.
AC motor control, electronic load and drive circuits.
Automotive.
Industrial PC modules (IPM) and measurement systems.
RF circuit terminations.
Constant current and precision voltage sources
Specification
Notes: Specifications subject to change without notice.
1. Electrically isolated metal tab.
2. Recommend the use of thermal grease between metal tab and heat sink.
3. Thermal design should account for a thermal resistance between resistor and tab of 1.3°C/W and a maximum resistor temperature of
155°C.
4. Resistances greater than 220Ω are available, please call factory.
5. For resistances from 220Ω to 51 KΩ the power rating shall be restricted to 50W.
6. Current rating: 25A maximum.
Items Specification Conditions
Power Rating
100 Watts
@ Tab Temp < 25°C
Power Rating
3.0 Watts
Free air.
Resistance Range
0.01-0.09 Ω 0.1-9.1 Ω 10-220 Ω
Extended resistance range to 51KΩ avail.
Nominal Resistance Series
E6 E12 E24
2.0 Ω and 5.0 Ω also available.
TCR 250 ppm/°C 100 ppm/°C 50 ppm/°C For -55 to +155°C
Tolerance 5% 5% and 1% 1%
Operation Temp. Range -55 - +155 °C
Rated Voltage (Max). 700V or √(P*R)
Dielectric Withstanding Voltage 2500 Volt 60 seconds.
Load Life ∆R +/- (1.0 %+0.05 Ω) 25°C, 90 min. ON, 30 min.OFF, 1000 hours.
Humidity ∆R +/- (1.0 %+0.05 Ω) 40°C, 90-95% RH, DC 0.1W, 1000 hours.
Temperature Cycle ∆R +/- (0.25 %+0.05 Ω) -55°C, 30 min.,+155°C 30min., 5cycles.
Soldering Heat (Max) ∆R +/- (0.25 %+0.05 Ω) 250+/-5°C, 3 seconds,
Solderability Min 95% coverage 230+/-5°C, 3 seconds.
Insulation Resistance Over 1000 MΩ Between terminals and metal back plate.
Vibration ∆R +/- (0.25 %+0.05 Ω)
Structure and Material
Epoxy Molding
Copper Wire Leads
Conductor
Resistor Film
Alumina
Copper Plate
Dimensions (mm)
dia.3.2
20
5.1
4.8
16.0 3+/-0.3 10.9 20
dia.0.8
MHP 140
100F
1
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.