Part Datasheet Search > Schneider Electric > NSYCVF85M230PF Datasheet PDF > NSYCVF85M230PF Other Datasheet PDF Pages 1/2
NSYCVF85M230PFDatasheet PDF
Page:
of 2 Go
If the format of the manual is confusing, please download and read the original PDF file.
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Jun 16, 2015
1
Product data sheet
Characteristics
NSYCVF85M230PF
ClimaSys forced vent. IP54, 85m3/h, 230V,
with outlet grille and filter G2
Main
Range ClimaSys CV
Category Fan
Type of filter Standard
Flow rate Free flow rate with standard filter : 98 m3/h at 60 Hz
Free flow rate with standard filter : 85 m3/h at 50 Hz
[Us] rated supply volt-
age
175...253 V
Input voltage 230 V 50/60 Hz
Complementary
Absorbed power 15 W 60 Hz
17 W 50 Hz
[In] rated current 0.097 A 60 Hz
0.121 A 50 Hz
Noise level < at 46...49 dB
Bearing type Ball
Height External : 170 mm
Width External : 150 mm
Depth External : 62 mm
Cut-out dimensions 125 x 125 mm
Product weight 0.78 kg
Material Injected thermoplastic (ASA PC) for outlet grille
Colour Outlet grille : grey RAL 7035
Ambient air temperature for operation -20...60 °C
Ambient air temperature for storage -40...70 °C
Maximum pressure 50 Pa flow rate 0 m³/h
Connections - terminals Faston connector
IP degree of protection IP54
Device composition 1 power cord
1 cut-out template
1 outlet grille front
1 filter front of axial motor
2 protective grille on the front and rear surfaces
1 axial motor
Condition of use Outside temperature must be 5 °C lower than inside temperature
Filter must be cleaned and replaced regularly
Surrounding environment must be relatively clean
Overfrequent filter replacement should be avoided
Flow rates depends on the work point, see ProClima software
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.