Part Datasheet Search > TI > TRF7960ARHBT Datasheet PDF > TRF7960ARHBT Datasheet Pages 1/68
TRF7960ARHBT Datasheet - TI
Manufacturer: | TI |
Case Package: | VQFN-32 |
Description: | NFC/RFID Read/Write 13.56MHz 32Pin VQFN EP T/R |
Pictures: |
TRF7960ARHBTDatasheet PDF
Page:
of 68 Go
If the format of the manual is confusing, please download and read the original PDF file.
TRF7960A
www.ti.com
SLOS732–JUNE 2011
MULTI-PROTOCOL FULLY INTEGRATED 13.56-MHz RFID READER/WRITER IC
Check for Samples: TRF7960A
1 Introduction
1.1 Features
123
• Completely Integrated Protocol Handling for • Dual Receiver Architecture With RSSI for
ISO15693, ISO18000-3, ISO14443A/B, NFC Elimination of "Read Holes" and Adjacent
Forum Device Types 1 to 4, and FeliCa Reader System/Ambient In-Band Noise
Detection
• Input Voltage Range: 2.7 VDC to 5.5 VDC
• Programmable Power Modes for Ultra-Low
• Programmable Output Power:
Power System Design (Power Down <0.5 µA)
+20 dBm (100 mW) or +23 dBm (200 mW)
• Parallel or SPI Interface
• Programmable I/O Voltage Levels:
1.8 VDC to 5.5 VDC • Integrated Voltage Regulator for
Microcontroller Supply
• Programmable System Clock Frequency
Output (RF, RF/2, RF/4) • Temperature Range: -40°C to +110°C
• Programmable Modulation Depth • 32-Pin QFN Package (5 mm x 5 mm) (RHB)
1.2 Applications
• Secure Access Control
• Product Authentication
• Contactless Payment Systems
• Passport Reader Systems
• Medical Systems
• Remote Sensor Applications
1.3 Description
The TRF7960A is an integrated analog front end and data-framing device for a 13.56-MHz RFID
reader/writer system. Built-in programming options make it suitable for a wide range of applications for
proximity and vicinity identification systems.
The reader is configured by selecting the desired protocol in the control registers. Direct access to all
control registers allows fine tuning of various reader parameters as needed.
Comprehensive documentation, reference designs, evaluation modules, and TI microcontrollers (based on
MSP430™ or ARM™ technology) source code are available.
The TRF7960A is a high-performance 13.56-MHz HF RFID reader IC comprising an integrated analog
front end (AFE) and a built-in data framing engine for ISO15693, ISO14443A/B, and FeliCa. It supports
data rates up to 848 kbps for ISO14443 with all framing and synchronization tasks on board (in ISO Mode,
default). The TRF7960A also supports NFC Forum Tag Types 1, 2, 3, and 4 operations (as reader/writer
only). This architecture enables the customer to build a complete and cost-effective yet high-performance
multiprotocol HF RFID/NFC reader/writer using a low-cost microcontroller (for example, an MSP430).
Other standards and even custom protocols can be implemented by using two of the Direct Modes the
device offers. These Direct Modes (0 and 1) allow the user to fully control the analog front end (AFE) and
also gain access to the raw subcarrier data or the unframed, but already ISO formatted data and the
associated (extracted) clock signal.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2MSP430 is a trademark of Texas Instruments.
3ARM is a trademark of ARM Limited.
PRODUCTION DATA information is current as of publication date.
Copyright © 2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Downloaded from Elcodis.com electronic components distributor
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.