●The ADE7953ACPZ is a Single-phase Multifunction Metering IC with neutral current measurement. It measures line voltage and current, calculates active, reactive and apparent energy, as well as instantaneous rms voltage and current. It incorporates three Σ-Δ ADCs with a high accuracy energy measurement core. The second input channel simultaneously measures neutral current and enables tamper detection and neutral current billing. The additional channel incorporates a complete signal path that allows a full range of measurements. Each input channel supports independent and flexible gain stages, making the device suitable for use with a variety of current sensors such as current transformers (CTs) and low value shunt resistors. Two on-chip integrators facilitate the use of Rogowski coil sensors. The ADE7953 provides access to on-chip meter registers via a variety of communication interfaces including SPI, I²C and UART.
● High accuracy
● Measures active, reactive and apparent energy, sampled waveform, current and voltage rms
● Provides a second current input for neutral current measurement
● Less than 0.1% error in active and reactive energy measurements over a dynamic range of 3000:1
● Less than 0.2% error in instantaneous IRMS measurement over a dynamic range of 1000:1
● Provides apparent energy measurement and instantaneous power readings
● 1.23kHz Bandwidth operation
● Flexible PGA gain stage (up to x22)
●ESD sensitive device, take proper precaution while handling the device.