MCR 3-way Isolating Amplifier
●The configurable MCR-FL-C-UI-UI-DCI-24/230 3-way standard signal isolation amplifier can process
●0 to 20 mA, 4 to 20 mA and 0 to 10 V standard signals on the input side.
●The 3-way isolation between signal input, output and supply is set up as "safe isolation" with a test voltage of 4 kV ?. Depending on the application, the signal transmission cut-off frequency can be set as either 10 kHz (approximately) or as a< 10 Hz filter. On the output side, any of the three standard signals are available.
●Adjustment after configuration is not necessary, as each transmission variant is calibrated and stored in
●the device. The transmission error is always < 0.1%.
●The 3-way standard signal isolation amplifier has a long-range supply of 20…253 V AC/DC and is available in 12.5 mm (0.492 in.) narrow housing with pluggable screw connection.
●Features:
● 3-way isolation
● Safe isolation in accordance with EN 61 010
● Configurable inputs and outputs
● Adjustable cut-off frequency <10 Hz/10 kHz, approximately
● Operating voltage 20...253 V AC/DC
● 12.5 mm (0.492 in.) ME Housing
