DESCRIPTION/ORDERING INFORMATION
●This 16-bit (dual-octal) noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC16245A is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements. This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
●To ensure the high-impedance state during power up or power down, OE should be tied to VCC
●through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
●FEATURES
●• Member of the Texas Instruments Widebus™ Family
●• Operates From 1.65 V to 3.6 V
●• Inputs Accept Voltages to 5.5 V
●• Max tpd of 4 ns at 3.3 V
●• Typical VOLP (Output Ground Bounce)
● <0.8 V at VCC = 3.3 V, TA = 25°C
●• Typical VOHV (Output VOH Undershoot)
● >2 V at VCC = 3.3 V, TA = 25°C
●• Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC)
●• Ioff Supports Partial-Power-Down Mode Operation
●• Latch-Up Performance Exceeds 250 mA Per JESD 17
●• ESD Protection Exceeds JESD 22
●– 2000-V Human-Body Model (A114-A)
●– 200-V Machine Model (A115-A)
●– 1000-V Charged-Device Model (C101)