ABPMAND001PG2A3 Datasheet PDF - Honeywell

The ABPMAND001PG2A3 is a 0 to 1psi 3.3VDC single axial barbed port piezo-resistive silicon Pressure Sensor offering a ratio-metric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The device is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors using an on-board application specific integrated circuit (ASIC). Calibrated output values for pressure are updated at approximately 1kHz for analog. This sensor measures gage and differential pressures. It is intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.

● Dry gases only, diagnostics on

● I²C, address 0 x 28 analog output

● 10 to 90% of Vsupply, 2¹⁴ counts no temperature output, no sleep mode

● Proprietary Honeywell technology

● ±0.25%FSS Industry-leading long-term stability

● ±1.5%FSS Total error band (TEB)

● Industry-leading flexibility

● Energy efficient