Product Details
●The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc."s _i_CMOS high voltage process. The device is configured through hardware or via a dedicated write only serial configuration port for input range and operating mode. The AD7610 contains a high speed 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports. A falling edge on CNVST samples the analog input on IN+ with respect to a ground sense, IN−. The AD7610 features four different analog input ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V. Power consumption is scaled linearly with throughput. The device is available in Pb-free 48-lead, low-profile quad flat package (LQFP) and a lead frame chip-scale (LFCSP_VQ) package. Operation is specified from −40°C to +85°C.
●Applications
● Process control
● Medical instruments
● High speed data acquisition
● Digital signal processing
● Instrumentation
● Spectrum analysis
● ATE
●### Features and Benefits
● Multiple pins/software programmable input ranges: 5 V, 10 V, ±5 V, ±10 V
● Pins or serial SPI®-compatible input ranges/mode selection
● Throughput: 250 kSPS
● 16-bit resolution with no missing codes
● INL: ±0.75 LSB typ, ±1.5 LSB max (±23 ppm of FSR)
● SNR: 94 dB @ 2 kHz
● _i_CMOS® process technology
● 5 V internal reference: typical drift 3 ppm/°C
● On-chip temperature sensor
● No pipeline delay (SAR architecture)
● Parallel (16- or 8-bit bus) and serial 5 V/3.3 V interface
● SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible