| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Case/Package | SC-70-5 |
| Supply Current | 38 µA |
| Number of Circuits | 1 Circuit |
| Number of Positions | 5 Position |
| Common Mode Rejection Ratio | 95 dB |
| Input Capacitance | 2.50 pF |
| Bandwidth | 400 kHz |
| Slew Rate | 100 mV/μs |
| Gain Bandwidth Product | 400 kHz |
| Input Impedance | 2.00 TΩ |
| Input Offset Voltage | 400 µV |
| Input Bias Current | 0.2 pA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 0.4 MHz |
| Minimum CMRR Range | 95 dB |
| Supply Voltage | 1.8V ~ 5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 2.2 mm |
| Size-Width | 1.35 mm |
| Size-Height | 0.9 mm |
| Operating Temperature | -40℃ ~ 125℃ |
Easily produce a large amount of gain in your electronic circuit by using this general purpose amplifier AD8613AKSZ-R2 from Analog Devices in a cascaded fashion. It has a minimum dual supply voltage of ±0.9 V and maximum of ±2.5 V. This op amp has a temperature range of -40 °C to 125 °C. This device uses one or two power supplies. It has a single channel per chip. This device utilizes CMOS technology.
ADI
Micropower, Low Noise, Low Cost CMOS RRIO Single Op Amp
ADI
OP Amp Single GP R-R I/O ±2.5V/5V 5Pin TSOT T/R
ADI
ANALOG DEVICES AD8613AKSZ-R2 Operational Amplifier, Single, 1 Amplifier, 400kHz, 0.1V/µs, 1.8V to 5V, SC-70, 5Pins
ADI
OP Amp Single GP R-R I/O ±2.5V/5V 5Pin SC-70 T/R
ADI
ANALOG DEVICES AD8613AUJZ-R2 Operational Amplifier, Single, 1 Amplifier, 400kHz, 0.1V/µs, 1.8V to 5V, TSOT-23, 5Pins
ADI
OP Amp Single GP R-R I/O ±2.5V/5V 5Pin SC-70 T/R
ADI
OP Amp Single GP R-R I/O ±2.5V/5V 5Pin TSOT T/R
ADI
ANALOG DEVICES AD8613AKSZ Operational Amplifier, Single, 1 Amplifier, 400kHz, 0.1V/µs, 1.8V to 5V, SC-70, 5Pins
Imagecraft
IC OPAMP GP 1 CIRCUIT TSOT5
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
