Product Details
●The AD9152 is a dual, 16-bit, high dynamic range digital-to-analog converter (DAC) that provides a maximum sample rate of 2.25 GSPS, permitting a multicarrier generation up to the Nyquist frequency. The DAC outputs are optimized to interface seamlessly with the ADRF6720 analog quadrature modulator (AQM) from Analog Devices, Inc. An optional 3-wire or 4-wire serial port interface (SPI) provides for programming/readback of many internal parameters. The full-scale output current can be programmed over a range of 4 mA to 20 mA. The AD9152 is available in a 56-lead LFCSP. The AD9152 is a member of the TxDAC+® family.
●Product Highlights
● 1. Ultrawide signal bandwidth enables emerging wideband and multiband wireless applications.
● 2. Advanced low spurious and distortion design techniques provide high quality synthesis of wideband signals from baseband to high intermediate frequencies.
● 3. JESD204B Subclass 1 support simplifies multichip synchronization in software and hardware design.
● 4. Fewer pins for data interface width with the serializer/deserializer (SERDES) JESD204B four-lane interface.
● 5. Programmable transmit enable function allows easy design balance between power consumption and wake-up time.
● 6. Small package size with an 8 mm × 8 mm footprint.
●Applications
● Wireless communications
● Multicarrier LTE and GSM base stations
● Wideband repeaters
● Software defined radios
● Wideband communications
● Point to point microwave radios
● LMDS/MMDS
● Transmit diversity, multiple input/multiple output (MIMO)
● Instrumentation
● Automated test equipment
●### Features and Benefits
● Supports input data rates up to 1.125 GSPS
● Proprietary low spurious and distortion design
● Single carrier LTE 20 MHz bandwidth (BW), ACLR = 77 dBc
●at 180 MHz IF
● SFDR = 72 dBc at 150 MHz IF, −6 dBFS
● Flexible 4-lane JESD204B interface
● Multiple chip synchronization
● Fixed latency
● Data generator latency compensation
● Selectable 1×, 2×, 4×, and 8× interpolation filter
● Low power architecture
● Input signal power detection
● Emergency stop for downstream analog circuitry protection
● Transmit enable function allows extra power saving
● High performance, low noise, phase-locked loop (PLL) clock multiplier
● Digital inverse sinc filter and programmable finite impulse response (FIR) filter
● Low power: 1223 mW at 1.5 GSPS, 1406 mW at 2.0 GSPS, full operating conditions
● 56-lead LFCSP with exposed pad
