The ADC32RF45 device is a 14-bit, 3.0-GSPS, dual-channel, analog-to-digital converter (ADC) that supports RF sampling with input frequencies up to 4 GHz and beyond. Designed for high signal-to-noise ratio (SNR), the ADC32RF45 delivers a noise spectral density of –155 dBFS/Hz as well as dynamic range and channel isolation over a large input frequency range. The buffered analog input with on-chip termination provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy.
●Each ADC channel can be connected to a dual-band, digital down-converter (DDC) with up to three independent, 16-bit numerically-controlled oscillators (NCOs) per DDC for phase-coherent frequency hopping. Additionally, the ADC is equipped with front-end peak and RMS power detectors and alarm functions to support external automatic gain control (AGC) algorithms.
●The ADC32RF45 supports the JESD204B serial interface with subclass 1-based deterministic latency using data rates up to 12.5 Gbps with up to four lanes per ADC. The device is offered in a 72-pin VQFN package (10 mm × 10 mm) and supports the industrial temperature range (–40°C to +85°C).
● 14-Bit, Dual-Channel, 3.0-GSPS ADC
● Noise Floor: –155 dBFS/Hz
● RF Input Supports Up to 4.0 GHz
● Aperture Jitter: 90 fS
● Channel Isolation: 95 dB at fIN = 1.8 GHz
● Spectral Performance (fIN = 900 MHz, –2 dBFS):
● SNR: 60.9 dBFS
● SFDR: 67-dBc HD2, HD3
● SFDR: 77-dBc Worst Spur
● Spectral Performance (fIN = 1.78 GHz, –2 dBFS):
● SNR: 58.8 dBFS
● SFDR: 66-dBc HD2, HD3
● SFDR: 75-dBc Worst Spur
● On-Chip Digital Down-Converters:
● Up to 4 DDCs (Dual-Band Mode)
● Up to 3 Independent NCOs per DDC
● On-Chip Input Clamp for Overvoltage Protection
● Programmable On-Chip Power Detectors with Alarm Pins for AGC Support
● On-Chip Dither
● On-Chip Input Termination
● Input Full-Scale: 1.35 VPP
● Support for Multi-Chip Synchronization
● JESD204B Interface:
● Subclass 1-Based Deterministic Latency
● 4 Lanes Per Channel at 12.5 Gbps
● Power Dissipation: 3.2 W/Ch at 3.0 GSPS
● 72-Pin VQFN Package (10 mm × 10 mm)
