GENERAL DESCRIPTION
●The ADP3181 is a highly efficient multiphase synchronous buck-switching regulator controller optimized for converting a 12 V main supply into the core supply voltage required by high performance Intel processors. It uses an internal 6-bit DAC to read a voltage identification (VID) code directly from the processor, which is used to set the output voltage. The CPUID input selects whether the DAC codes match the VRM 9 or VRD 10 specifications. It uses a multimode PWM
●architecture to drive the logic-level outputs at a programmable switching frequency that can be optimized for VR size and efficiency. The phase relationship of the output signals can be programmed to provide 2-, 3-, or 4-phase operation, allowing for the construction of up to four complementary buck-switching stages.
●FEATURES
●Selectable 2-, 3-, or 4-phase operation at up to 1 MHz per phase
●±14.5 mV worst-case mV differential sensing error over temperature
●Logic-level PWM outputs for interface to external high power drivers
●Active current balancing between all output phases
●Built-in power good/crowbar blanking supports on-the-fly
● VID code changes
● Digitally programmable output can be switched between
● VRM 9 (5-bit) and VRD 10 (6-bit) VID codes for
● ADP3181JRU. (VRD10 (6-bit) only for ADP3181JRQ)
●Programmable short circuit protection with programmablelatch-off delay
●APPLICATIONS
●Desktop PC power supplies for next-generation Intel processors VRM modules
