The ADUCM360BCPZ128 is a fully integrated, 3.9 kSPS 32-bit Precision Analog Microcontroller incorporates dual high performance, multichannel sigma-delta (Σ-Δ) (Σ-Δ) ADCs, a 32-bit ARM Cortex™-M3 processor and flash/EE memory on a single chip. The ADuCM360 contain an on-chip 32kHz oscillator and an internal 16MHz high frequency oscillator. The high frequency oscillator is routed through a programmable clock divider from which the operating frequency of the processor core clock is generated. The maximum core clock speed is 16MHz; this speed is not limited by operating voltage or temperature. The microcontroller core is a low power ARM Cortex-M3 processor, a 32-bit RISC machine that offers up to 20MIPS peak performance. The Cortex-M3 processor incorporates a flexible, 11-channel DMA controller that supports all wired communication peripherals (SPI, UART and I²C). Also integrated on chip are 128kB of nonvolatile Flash/EE memory and 8kB of SRAM.
● Dual 24-bit ADCs
● Programmable ADC output rate (3.5Hz to 3.906kHz)
● Simultaneous 50Hz/60Hz noise rejection
● Flexible input mux for input channel selection to both ADCs
● Programmable sensor excitation current sources
● On-chip precision voltage reference
● Single 12-bit voltage output DAC
● Serial wire download and debug
● Internal watch crystal for wake-up timer
● 16MHz Oscillator with 8-way programmable divider
● In-circuit debug/download via serial wire and UART
● Overall system current consumption of 1.0mA with core
● 16-bit PWM controller
● 19-pin Multifunction GPIO port
● 2 General-purpose timers
● Wake-up timer/watchdog timer
● Multichannel DMA and interrupt controller