AM26LV31ESDREP Datasheet PDF - TI

The AM26LV31ESDREP is a quadruple differential Line Driver with 3-state outputs. This driver has ±15kV ESD (HBM and IEC61000-4-2, air-gap discharge) and ±8kV ESD (IEC61000-4-2, contact discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 driver with reduced supply voltage. The device is optimized for balanced-bus transmission at switching rate up to 32MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines and provide a high impedance in the power-OFF condition.

● IOFF supports partial-power-down mode operation

● Driver output short-circuit protection

● Glitch-free power-up/power-down protection

● Accepts 5V logic inputs with 3.3V supply

● 8ns Typical propagation delay time

● 500ps Typical pulse skew time

● ±30mA High output-drive current

● 5ns Typical controlled rise and fall time

● 2.6V Typical differential output voltage with 100R load

● 32Mbps Signalling rate

● Green product and no Sb/Br