| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 2 Pin |
| Resistance | 10 Ω |
| Resistance Tolerance | ±20 % |
The B57235S0xxxM0xx series from EPCOS are radial leaded NTC inrush current limiters (ICLs). These NTC thermistors can be used as inrush current limiters to suppress high inrush current. The high currents in the circuits are caused by low impedance of smoothing capacitors or coils which produce short circuits when the device is switched on. B57235S0xxxM0xx series ICLs are commonly used in switch mode power supplies.
● Useable in series connections up to 265Vrms
● Coated thermistor disk
● Kinked leads of tinned copper wire
● Small size
● UL (E69802) approved
● Resistance value at 25°C range from 2.5ohm to 10 ohm
● Tolerance is ±20%
● Maximum steady state current at 25°C range from 3A to 5.2A
● Maximum power at 25°C is 1.8W
● Cost effective thermistor
Epcos
18 Pages / 0.4 MByte
Epcos
20 Pages / 0.42 MByte
Epcos
3 Pages / 0.03 MByte
Epcos
Thermistor NTC 10Ω 20% 2Pin Radial 2900K Bulk
Epcos
Thermistor NTC 10Ω 20% 2Pin Radial 2900K Bulk
Epcos
Thermistor NTC 10Ω 20% 2Pin Radial 2900K T/R
TDK-EPC
Thermistor NTC 10Ω 20% 2Pin Radial 2900K T/R Automotive
TDK-EPC
Thermistor NTC 10Ω 20% 2Pin Radial 2900K Bulk Automotive
Epcos
Thermistor NTC 10Ω 20% 2Pin Radial 2900K Bulk
TDK-EPC
RESISTOR, TEMPERATURE DEPENDENT, NTC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
