BQ24075EVM Datasheet PDF - TI

The BQ24075EVM is an evaluation module for BQ24075, an integrated Li ion linear charger and system power path management device targeted at space limited portable applications. The devices operate from either a USB port or AC adapter and support charge currents up to 1.5A. The evaluation module also supports bq24072/3/4/9 and bq24230/2 (bqTiny-III) devices. The charger is programmed from the factory to deliver 0.9A of charging current. This evaluation module was designed as a stand alone evaluation module, but it also can be interfaced with the system and host via the connectors and headers.

● 100mA maximum current limit ensures compliance to USB to IF standard

● Dynamic power path management (DPPM)

● 28V input rating with over voltage protection

● Selectable 100mA and 500mA maximum input current

● Small 3mm × 3mm 16 lead QFN package

● Status indication (charging/done, power good)

● Reverse current, short circuit and thermal protection

● Programmable pre charge and fast charge safety timers

● Proprietary start up sequence limits inrush current

●It is important to operate this EVM within the input voltage range of 0V to 6.5V and the output voltage range of 0V to 6.5V. Exceeding the specified input range may cause damage to the EVM.