C8051F061 Datasheet PDF - Silicon Labs

System Overview

●The C8051F06x family of devices are fully integrated mixed-signal System-on-a-Chip MCUs with 59 digital I/O pins (C8051F060/2/4/6) or 24 digital I/O pins (C8051F061/3/5/7), and two integrated 16-bit 1 Msps ADCs. Highlighted features are listed below; refer to Table 1.1 for specific product feature selection.

●• High-Speed pipelined 8051-compatible CIP-51 microcontroller core (up to 25 MIPS)

●• Two 16-bit 1 Msps ADCs with a Direct Memory Access controller

●• Controller Area Network (CAN 2.0B) Controller with 32 message objects, each with its own indentifier mask (C8051F060/1/2/3)

●• In-system, full-speed, non-intrusive debug interface on-chip

●• 10-bit 200 ksps ADC with PGA and 8-channel analog multiplexer (C8051F060/1/2/3)

●• Two 12-bit DACs with programmable update scheduling (C8051F060/1/2/3)

●• 64 kB (C8051F060/1/2/3/4/5) or 32 kB (C8051F066/7) of in-system programmable Flash memory

●• 4352 (4096 + 256) bytes of on-chip RAM

●• External Data Memory Interface with 64 kB direct address space (C8051F060/2/4/6)

●• SPI, SMBus/I2C, and (2) UART serial interfaces implemented in hardware

●• Five general purpose 16-bit Timers

●• Programmable Counter/Timer Array with six capture/compare modules

●• On-chip Watchdog Timer, VDD Monitor, and Temperature Sensor

●Analog Peripherals

●\- Two 16-Bit SAR ADCs

●   • 16-bit resolution

●   • ±0.75 LSB INL, guaranteed no missing codes

●   • Programmable throughput up to 1 Msps

●   • Operate as two single-ended or one differential con verter

●   • Direct memory access; data stored in RAM without software overhead

●   • Data-dependent windowed interrupt generator

●\- 10-bit SAR ADC (C8051F060/1/2/3)

●   • Programmable throughput up to 200 ksps

●   • 8 external inputs, single-ended or differential

●   • Built-in temperature sensor

●\- Two 12-bit DACs (C8051F060/1/2/3)

●   • Can synchronize outputs to timers for jitter-free wave form generation

●\- Three Analog Comparators

●   • Programmable hysteresis/response time

●\- Voltage Reference

●\- Precision VDD Monitor/Brown-Out Detector

●On-Chip JTAG Debug & Boundary Scan

●\- On-chip debug circuitry facilitates full-speed, nonintrusive in-circuit/in-system debugging

●\- Provides breakpoints, single-stepping, watchpoints, stack monitor; inspect/modify memory and registers

●\- Superior performance to emulation systems using ICE-chips, target pods, and sockets

●\- IEEE1149.1 compliant boundary scan

●\- Complete development kit

●High Speed 8051 µC Core

●\- Pipelined instruction architecture; executes 70% of instruction set in 1 or 2 system clocks

●\- Up to 25 MIPS throughput with 25 MHz clock

●\- Flexible Interrupt sources

●Memory

●\- 4352 Bytes internal data RAM (4 k + 256)

●\- 64 kB (C8051F060/1/2/3/4/5), 32 kB (C8051F066/7) Flash; In-system programmable in 512-byte sectors

●\- External 64 kB data memory interface with multiplexed and non-multiplexed modes (C8051F060/2/4/6)

●Digital Peripherals

●\- 59 general purpose I/O pins (C8051F060/2/4/6)

●\- 24 general purpose I/O pins (C8051F061/3/5/7)

●\- Bosch Controller Area Network (CAN 2.0B - C8051F060/1/2/3)

●\- Hardware SMBus™ (I2C™ Compatible), SPI™, and two UART serial ports available concurrently

●\- Programmable 16-bit counter/timer array with 6 capture/compare modules

●\- 5 general purpose 16-bit counter/timers

●\- Dedicated watchdog timer; bi-directional reset pin

●Clock Sources

●\- Internal calibrated precision oscillator: 24.5 MHz

●\- External oscillator: Crystal, RC, C, or clock

●   Supply Voltage .......................... 2.7 to 3.6 V

●\- Multiple power saving sleep and shutdown modes

●100-Pin and 64-Pin TQFP Packages Available Temperature Range: -40 to +85 °C