The DAC104S085 device is a full-featured, general-purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
●The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
●A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
●The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery-operated equipment.
●The DAC104S085 is one of a family of pin-compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of 40°C to +125°C.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Device Temperature Grade 1: 40°C to 125°C
●Ambient Operating Temperature
● Ensured Monotonicity
● Low Power Operation
● Rail-to-Rail Voltage Output
● Power-On Reset to 0 V
● Simultaneous Output Updating
● Wide Power Supply Range (2.7 V to 5.5 V)
● Key Specifications
● Resolution: 10 bits
● INL: ±2 LSB (Maximum)
● DNL: +0.35 / 0.25 LSB (Maximum)
● Settling Time: 6 µs (Maximum)
● Zero Code Error: 15 mV (Maximum)
● Full-Scale Error: 0.75% FS (Maximum)
● Typical Supply Power
● Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
● Power Down: 0.3 µW (3 V), 0.8µW (5 V)