The DAC6573 is a low-power, quad channel, 10-Bit buffered voltage output DAC. Its on-chip precision output amplifier allows rail-to-rail output swing. The DAC6573 utilizes an I2C compatible two wire serial interface supporting high-speed interface mode with address support of up to sixteen DAC6573s for a total of 64 channels on the bus.
●The DAC6573 requires an external reference voltage to set the output range of the DAC. The DAC6573 incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write takes place in the device. The DAC6573 contains a power-down feature, accessed via the internal control register, that reduces the current consumption of the device to 200 nA at 5 V.
●The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is less than 3 mW at VDD=5 V reducing to 1 µW in power-down mode.
●The DAC6573 is available in a 16-lead TSSOP package.
● _Micro_power Operation: 500 µA at 3 V VDD
● Fast Update Rate: 188 kSPS
● Power-On Reset to Zero
● 2.7 V to 5.5 V Analog Power Supply
● 10-Bit Monotonic
● I2C Interface up to 3.4 Mbps
● Data Transmit Capability
● Rail-to-Rail Operation Output Buffer Amplifier
● Double-Buffered Input Register
● Address Support for up to Sixteen DAC6573s
● Synchronous Update for up to 64 Channels
● Voltage Translators for all Digital Inputs
● Operation From 40°C to 105°C
● Small 16 Lead TSSOP Package
● APPLICATIONS
● Process Control
● Data Acquisition Systems
● Closed-Loop Servo Control
● PC Peripherals
● Portable Instrumentation
●I2C is a trademark of Philips Corporation.
