The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.
●The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.
●A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.
●Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.
●The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD.
● Pulse Width Modulation (PWM) Microstepping Motor Driver
● Built-In Microstepping Indexer
● Up to 8 Microsteps/Step
● Step and Direction Control
● Programmable Mixed Decay, Blanking, and Off Time
● Up to 2.5-A Current Per Winding
● Low 0.37-Ω (HS + LS) MOSFET RDS(ON) (25°C)
● 8-V to 35-V Operating Supply Voltage Range
● Pin to Pin Upgrade for DRV8811 With Lower RDS(ON)
● Thermally-Enhanced Surface Mount Package
● Protection Features
● VM Undervoltage Lockout (UVLO)
● Overcurrent Protection (OCP)
● Thermal Shutdown (TSD)