Transmissive sensing heads in standard, L-shaped, T-shaped and close-mounting configurations match most applications. Wide 5-24 VDC operating voltage range makes these photomicrosensors compatible with TTLs, relays and programmable controllers. Wire selectable Light-ON/Dark-ON output operation. Operation indicator for easy monitoring. Wire directly to sensor or use optional EE-1001 unwired or EE-1006 prewired connectors for convenience in servicing.
●Output Specifications:
● 100 mA load with 0.8 V residual voltage; 40 mA load with 0.4 V residual voltage when driving TTL.
●Response Frequency:
● 1 kHz (3 kHz typical).
●Sensing Method:
● Transmissive.
●Sensing Distance:
● 5 mm slot width with opaque 0.8 × 2 mm object 0.025 mm differential distance.
●Power Requirements:
● 5 to 24 VDC ±10% 10% max. ripple peak-to-peak 35 mA current consumption. PNP output types available.
●Features:
● Standard, L-Shaped, and T-Shaped Models Available
● Pre-Wired with 2 m Flexible Cable and Conforms to Machine Contours
● Models Available in Light-ON/Dark-ON Output Configurations
● Response Frequency as High as 1 kHz
● Easy to Monitor, Indicators Are Visible from Both Sides
● Allows Standard ME-Screw Mounting
●Specifications:
● Voltage Range: 5-24 VDC
● Load Rating: NPN Open Collector: 100 mA (5-24 VDC), 40 mA (TTL)
●PNP Open Collector: 50 mA (5-24 VDC)
● Enclosure Rating: IP60
