EL1883ISZ Datasheet PDF - Renesas Electronics

The EL1883ISZ is a Video Sync Separator manufactured using Elantec"s high performance analog CMOS process. This device extracts sync timing information from both standard and non-standard video input and also in the presence of Macrovision pulses. It provides composite sync, vertical sync, burst/back porch timing and horizontal outputs. Fixed 70mV sync tip slicing provides sync edge detection when the video input level is between 0.5 and 2VP-P (sync tip amplitude 143 to 572mV). A single external resistor sets all internal timing to adjust for various video standards. The composite sync output follows video in sync pulses and a vertical sync pulse is output on the rising edge of the first vertical serration following the vertical pre-equalizing string. For non-standard vertical inputs, a default vertical pulse is output when the vertical signal stays low for longer than the vertical sync default delay time. The horizontal output gives horizontal timing with pre/post equalizing pulses.

● NTSC, PAL, SECAM, non-standard video sync separation

● 70mV Fixed slicing of video input levels from 0.5 to 2Vp-p

● 1.5mA (typical) Low supply current

● Composite sync output

● Vertical output

● Horizontal output

● Burst/back porch output

● Macrovision compatible