The FAN6300AMY is a highly integrated quasi-resonant current-mode PWM Controller provides several features to enhance the performance of flyback converters. It is applied on quasi-resonant flyback converters where maximum operating frequency is below 100kHz. A built-in HV startup circuit can provide more startup current to reduce the startup time of the controller. Once the VDD voltage exceeds the turn-on threshold voltage, the HV startup function is disabled immediately to reduce power consumption. An internal valley voltage detector ensures power system operates at quasi-resonant operation over a wide-range of line voltage and any load conditions, as well as reducing switching loss to minimize switching voltage on drain of power MOSFET. To minimize standby power consumption and light-load efficiency, a proprietary green-mode function provides off-time modulation to decrease switching frequency and perform extended valley voltage switching to keep to a minimum switching voltage.
● High-voltage startup
● Quasi-resonant operation
● Cycle-by-cycle current limiting
● Peak-current-mode control
● Leading-edge blanking (LEB)
● Internal minimum tOFF
● Internal 5ms soft-start
● Over power compensation
● GATE Output maximum voltage
● Auto-recovery over-current protection(FB pin)
● Auto-recovery open-loop protection(FB pin)
● VDD pin and output voltage (DET pin) OVP latched
