The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the V level, and the B Port tracks the V level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both Vs reach active levels allowing either V to be powered-up first. Internal power down control circuits place the device in 3-STATE if either V is removed. The Transmit/Receive (T/R#) input determines the direction of data flow through the device. The OE# input, when HIGH, disables both the A and B Ports by placing them in a 3-STATE condition. The FXL2T245 is designed so that the control pins (T/R# and OE#) are supplied by V
●Features
●---
● |
● Bi-directional interface between any 2 levels from 1.1V to 3.6V
● Fully configurable, inputs track VCC level
● Non-preferential power-up sequencing; either VCC may be powered-up first
● No power-up sequencing required
● Outputs remain in 3-STATE until active VCC level is reached
● Outputs switch to 3-STATE if either VCC is at GND
● Power-off protection
● Control inputs (T/R#, OE#) levels are referenced to VCCA voltage
● Packaged in 10-lead Pb-Free MicroPak (1.6mm x 2.1mm) package
● ESD protection exceeds:
● 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7)
● 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)
● 1kV CDM ESD (per ESD STM 5.3)
● 200V MM ESD (per JESD22-A115 & ESD STM5.2)
