The FXL5T244 is a configurable dual-voltage-supply translator designed for one-way (unidirectional) voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. A Inputs and the OE# Control Pin track the V level, and Y Outputs track the V level. Both inputs and outputs are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for unidirectional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both Vs reach active levels allowing either V to be powered-up first. The device also contains power down control circuits that place the device in 3-STATE if either V is removed. The OE# input, when HIGH, disables the outputs by placing them in 3-STATE condition.
●Features
●---
● |
● One-way (unidirectional) translation between any 2 levels from 1.1V to 3.6V
● Fully configurable, inputs and outputs track respective VCC levels
● Non-preferential power-up sequencing; either VCC may be powered-up first
● Outputs remain in 3-STATE until active VCC level is reached
● Outputs switch to 3-STATE if either VCC is at GND
● Power-off protection
● Control input (OE#) level is referenced to VCCI voltage
● Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package
● ESD protection exceeds:
● 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7)
● 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)
● 1kV CDM ESD (per ESD STM 5.3)
● 200V MM ESD (per JESD22-A115 & ESD STM5.2)
